超声波雾化喷嘴_上海斐卓Feizhuo_河南超声波雾化喷嘴

一般雾化液体(油或水)都采用压力雾化喷嘴(离心喷嘴)。当液体流量太大时(或液体粘性过大时),由于离心喷嘴喷口尺寸增加,喷嘴出口液膜增加,造成液体雾化质量恶化,液珠的索太尔平均直径(dS,m)急剧增加。为了在液体流量较大时,得到理想雾化质量,可以采用压缩空气(或蒸气)作为雾化剂,来改善雾化质量。雾化剂压力一般在013~015MPa,例如Y型喷嘴,内混式喷嘴和外混式喷嘴等。由于Y型、内混式和外混式喷嘴,仅利用雾化剂的气动能来雾化液体,因而所需雾化剂量较大,为了得到理想的液珠平均直径,一般雾化剂占被雾化液体质量的30%~60%。

超声波雾化喷嘴,不仅利用雾化剂的气动能,更主要依赖于超声波能来雾化液体[1],因此,不但可以降低雾化剂的用量,而且可以进一步改善雾化质量。

超声波雾化喷嘴又称干雾抑尘喷嘴，能够准确有效的控制粉尘现场，拥有内部混合设计JCO喷嘴和外部混合设计JAU的喷嘴。对于特定的流量，我们可以提供特殊定制，满足您的要求。流量0.15 J至25 JN的型号。 空气雾化喷嘴能够比同类型的喷嘴节约50％至60％的资源，我们的双流体喷嘴和超声波雾化喷嘴的*之处在于，喷嘴具有气压可调节比例20:1，和雾滴大小减少调制能力.

Ultrasonic atomization nozzle is also called dry fog dust suppression nozzle, can effectively control the accurate dust in the scene, with external and internal mixing design JCO nozzle mix design JAU nozzle.For a specific flow, we can provide special customization, meet your requirements.Flow of 0.15 J to 25 Jacqueline Nottingham models.Air atomizing nozzle can be better than the same type of nozzle save 50% to 60% of the resources, our twin fluid nozzle, and ultrasonic atomizing nozzle is unique in that the nozzle with pressure adjustable ratio systematically, and the droplets size reducing modulation ability. Ultrasonic atomization nozzle is also called dry fog dust suppression nozzle, can effectively control the accurate dust in the scene, with external and internal mixing design JCO nozzle mix design JAU nozzle.For a specific flow, we can provide special customization, meet your requirements.Flow of 0.15 J to 25 Jacqueline Nottingham models.Air atomizing nozzle can be better than the same type of nozzle save 50% to 60% of the resources, our twin fluid nozzle, and ultrasonic atomizing nozzle is unique in that the nozzle with pressure adjustable ratio systematically, and the droplets size reducing modulation capability.

烟气洗涤空心喷嘴上海斐卓喷雾系统公司

烟气洗涤喷嘴以空心喷嘴为主，喷雾均匀，性能稳定。使用方便；主要适用于炼钢厂小方坯连铸机的二次冷却，也可用于气体的清洗，冷却水处理，产品去污，喷湿，海水喷洒等。还可应用于烟气洗涤，烟囱冷却，消泡等。、

喷嘴尺寸为：1/4  1/2 3/4 等；

喷雾角度有60°和120度；

喷嘴材质为黄铜和不锈钢；

喷嘴的订购信息请联系我司：上海斐卓喷雾系统公司，地址：上海 松江洞泾工业区洞业路205号